Authentic Supply
Product identity and requested make reviewed against the exact sourcing requirement.
0.45 µm — analysis and clarification
0.45 Micron Filters for Water Analysis and Clarification
0.45 micron filters are used for water analysis, particle counting, sample clarification and general laboratory filtration. In water testing the 0.45 micrometre cut is the conventional boundary between dissolved and suspended fractions, which is why analytical methods specify it explicitly.
Brand Sourcing Network
Trusted Global Brands. Reliable Local Support.
ScientificEdge helps laboratories structure product, grade and documentation requirements for instruments, chemicals, filtration systems and consumables before supply is confirmed.
Documentation Support
Clear technical specs, compliance details, and buying clarity.
PAN-India Delivery
Timely fulfilment with responsive coordination across regions.
Partner Confidence
Brand-focused sourcing support
For pharma, research, diagnostics and industrial laboratories that need clear product and documentation discussions.
Featured Brand Portfolio
30 local brand logos
Answer first
What 0.45 Micron Filters Are, and How They Are Specified
0.45 micron filters are used for water analysis, particle counting, sample clarification and general laboratory filtration. In water testing the 0.45 micrometre cut is the conventional boundary between dissolved and suspended fractions, which is why analytical methods specify it explicitly.
The 0.45 µm rating carries a specific analytical meaning: it is the conventional operational definition separating dissolved from particulate. When a method calls for dissolved metals or filterable residue, it is a 0.45 µm filtration step that defines what counts as dissolved.
That makes this a different purchase from a 0.22 µm sterilising filter. The buyer here is running an analysis or clarifying a sample, and what matters is consistency with the method, low extractables and no interference with the analyte — not a validated microbial barrier.
Specification
0.45 micron filter specification
| Parameter | Typical value or range | Notes |
|---|---|---|
| Rating | 0.45 µm | The dissolved and suspended boundary in water analysis |
| Membrane options | Cellulose acetate, MCE, nylon, PES, PVDF, PTFE | Chosen on analyte and solvent |
| Typical duty | Water analysis, particle counting, clarification | Not a sterilising grade |
| Formats | Cartridge, capsule, disc, syringe filter | Discs common for gravimetric methods |
| Disc diameters | Commonly 47 mm for water analysis | Matches standard filtration assemblies |
| Extractables | Low, grade dependent | Matters where trace analysis follows |
| Binding | Analyte dependent | Nylon and MCE can bind some analytes |
Rating
- Typical value or range
- 0.45 µm
- Notes
- The dissolved and suspended boundary in water analysis
Membrane options
- Typical value or range
- Cellulose acetate, MCE, nylon, PES, PVDF, PTFE
- Notes
- Chosen on analyte and solvent
Typical duty
- Typical value or range
- Water analysis, particle counting, clarification
- Notes
- Not a sterilising grade
Formats
- Typical value or range
- Cartridge, capsule, disc, syringe filter
- Notes
- Discs common for gravimetric methods
Disc diameters
- Typical value or range
- Commonly 47 mm for water analysis
- Notes
- Matches standard filtration assemblies
Extractables
- Typical value or range
- Low, grade dependent
- Notes
- Matters where trace analysis follows
Binding
- Typical value or range
- Analyte dependent
- Notes
- Nylon and MCE can bind some analytes
Typical values across the class. Compatibility with your method follows the datasheet of the filter quoted.
Selection guidance
Match the membrane to the analyte, not just the rating
Two 0.45 µm filters of different membrane chemistry can give different analytical results on the same sample, because some membranes adsorb the very analyte being measured. Nylon and mixed cellulose ester can bind certain organics and proteins; cellulose acetate is low binding for proteins; PTFE suits organic solvents.
For trace work, pre-rinse the filter with sample or with reagent water before collecting the filtrate, and keep the membrane type consistent across a study. Changing membrane mid-programme introduces a step change in results that looks like a real trend.
Application mapping
Where 0.45 Micron Filters Are Used
Dissolved metals analysis
- Typical requirement
- Method-defined 0.45 µm separation
- Indicated configuration
- 47 mm disc in a standard assembly, membrane chosen for low metal extractables
Sample clarification before HPLC or IC
- Typical requirement
- Particulate removed without analyte loss
- Indicated configuration
- 0.45 µm syringe filter matched to the solvent and analyte
Particle counting and gravimetric residue
- Typical requirement
- Consistent, defined retention
- Indicated configuration
- 0.45 µm disc, pre-weighed where the method is gravimetric
Replacement and consumables
Replacement Intervals and the Signs It Is Due
Intervals are indicative planning figures. The signal in the last column is what should actually trigger the change.
| Duty | Typical interval | Signs it is due |
|---|---|---|
| Analytical filtration | Single use per sample | Discard after each sample to avoid carryover |
| Sample clarification | Single use | Flow decay during a single sample indicates the load is too high |
| Inline clarification cartridge | By throughput and differential | Differential pressure rise at constant flow |
Analytical filtration
- Typical interval
- Single use per sample
- Signs it is due
- Discard after each sample to avoid carryover
Sample clarification
- Typical interval
- Single use
- Signs it is due
- Flow decay during a single sample indicates the load is too high
Inline clarification cartridge
- Typical interval
- By throughput and differential
- Signs it is due
- Differential pressure rise at constant flow
Analytical filters are single use. Reuse across samples introduces carryover that will not be visible in the result.
Put this on a standing order
Once a plant has a year of running behind it, consumption for this item is predictable. Sending the plant list and last year's usage gets it scheduled against your maintenance calendar instead of ordered in an emergency at the point the plant is already out of specification.
Commercial terms
How This Category Is Quoted
Water treatment does not have a list price, and any supplier quoting one before seeing a feed analysis is quoting a different plant from the one you need.
Pricing basis
On request, and capacity-dependent. Plant pricing moves with capacity, feed water analysis and the recovery target; membranes, cartridges and resins are quoted per element, per lot or per litre of media.
Order quantity
From a single replacement element or a case of cartridges through to full plant scope. Consumable lines are quoted per box or per lot, and the lot size is stated on the quotation.
Lead time
Confirmed per line item at quotation stage. Stocked consumable lines and made-to-order plant differ substantially, so a single blanket lead time for the category would be misleading — the quotation carries the figure for each line.
Invoicing
GST invoice against company or institutional purchase order. Proforma issued where advance payment or internal approval requires it.
Delivery coverage
Despatch from Delhi NCR across India, including plant, project and institutional sites. Delivery city and site access are asked for at enquiry because both affect despatch mode.
Documentation
Technical datasheet for the item quoted, and a test certificate where the principal supplies one with that product. Tender and institutional documentation formats are prepared on request — send the format with the enquiry so the quotation is issued in a form you can submit without rework.
Request for quotation
Request a Quote — 0.45 Micron Filters
Fields marked with an asterisk are required. The technical fields are what usually decide whether you get a quotation on the first pass or three emails of clarification.
Frequently asked
0.45 Micron Filters — Common Questions
Why do water analysis methods specify 0.45 micron?
Because 0.45 micrometres is the conventional operational boundary between the dissolved and suspended fractions in water analysis. It is a definition rather than a physical absolute.
That is why methods for dissolved metals or filterable residue name the filtration step explicitly — changing the rating changes what the result means.
Can I use a 0.45 micron filter for sterile filtration?
No. Sterilising duty requires 0.22 µm with validated bacterial retention data and in-place integrity testing.
0.45 µm is a clarifying and analytical rating. Some organisms pass it, so it provides no microbial barrier claim.
Which membrane material should I choose at 0.45 micron?
It depends on the analyte and the solvent. Cellulose acetate is low protein binding, PTFE suits organic solvents, nylon is broadly compatible but can bind some analytes, and PES gives high flow on aqueous samples.
For trace analysis, check extractables as well as compatibility, and keep the membrane type consistent across a study.
Related Products and Categories
Specified alongside 0.45 micron filters, and the category this page sits in.
0.22 micron filters for sterilising dutySyringe filters for sample preparationWater testing solutionsBack to Cartridge Filters
- Delhi NCR base with pan-India supply, including plant and project sites.